Products >> Servo motors

Intelligent servo controller

    • RC servo can be controlled without RC radio unit.

The servo operation can be controlled by CPU A/D converter input voltage. To make the control voltage, you may use the variable resister, such as 5K ohm VR.

Since it is controlled in order to operate at 5V internally with a 3-terminal voltage regulator, extensive power source management is not required.

A microprocessor can by used to provide D/A servo control application.

This is also equipped with analog interface.

In addition to our servos, JR or FUTABA servo control is possible directly. (There is interchangeability, but operation will be outside of warranty coverage.)

click the photo